• +48-786-816-215

    • Welcome to my Industrial World

    From program to quality production

    Introduction : 

       Dear visitor,
       It is a pleasure, that you have decided visitited my website. It might be the entrance to further cooperation.
       Across the years I had the opportunity to work on differrent steps of product development . From the acquisition till quality verification onsite of the final customer. It was mostly related to the Automotive industry, however my university background and practical experience connecting me also with aviation sector. 
       Being a part of industrial process has allowed me understand  many important aspects related to this bussines. Taking a conclusion from each phases, I would like to provide you in the best service I am able to. 
       Please  check my experience and the details below. 
       I am open minded, if you need any other service, please contact me. Nothing is impossible!

     Kind regards, 
    Robert Krzywy

    Industry experience

    Overview of activities

    Experience description

    Loading...

    • Program -> Milestone

    • Design -> Automotive / Aviation
      CAD, CAE, CFD -> Catia V5/V6, ANSYS Fluent 
      PLM -> Magellan , Team Center
      Processes -> Casting, Moulding, Stamping, 3D printing,  Milling, Turning, Drilling, Riveting etc. 
       
    • Development -> Stack-up, DFMEA, FEA, BOM, 

       

    • Validation -> Rapid prototype, tests, DVA

    • Production -> from SOP till the end of production

       

    • Quality -> Resident, Quality wall manager,

      => System Engineer, Project Manager

    Service description

    1 Program
    2 Design
    3 Development
    4 Validation
    5 Production
    6 Quality
    Previous
    Next

                                                                              Automotive / Mechanical industy experience

    Program
    Design
    Development

    Thank you for your interesting

    Hover Me Please, to check the back side

    Contact Me

    Responsibilities:
    1) to set up the team,
    2) publish the timing according to the phase of D&D,
    3) calculate the budget,

    We are So Glad You Are Here

    Hover Me Please, to check the back side

    Contact Me


    1) CAD/ CAE -> CATIA V5/V6 ( 3D, Drawings, parametric, kinematic, variants)
    2) GD&T;
    3) Design Failure Mode Effect Analysis;

    Thank you for my consideration

    Hover Me Please, to check the back side

    Contact Me


    Responsibilities:
    1) Meetings,
    2) Stack-up,
    3) Bill of material
    Validation
    Production
    Quality

    Contact me any time you need it

    Hover Me Please, to check the back side

    Contact Me


    1) Prototypes,
    2) Test,
    3) Certyfication,

    Thank you for searching

    Hover Me Please, to check the back side

    Contact Me


    This content is related to the Supplier. Possible support with defining the supplier for manufacturing.

    If you have any questions, I will answer it

    Hover Me Please, to check the back side

    Contact Me


    Responsibilities
    1) Resident Engineer
    2) Quality Wall Manager

    Contact

     Thank you for your interesting and trust.
              Please do not hesitate contact me.
                          I am for your disposal.   
                                                               
                                                        Robert Krzywy
      

         Thank you for your interesting and trust.
                  Please do not hesitate contact me.
                        I am for your disposal.   
                                                               
                                                              Robert Krzywy

    Call Me